Especificaciones:

- Input:
Nominal input level: +4dBu (-15dBFS).ÿ Maximum input level: +20dBu (7.0 Vrms)
Input impedance: 10k

- Output:
Sound Pressure Level (SPL): ~113dB at 1 meter at max input below clipping.
Low Frequency (LF) power: 80 watts RMS, ~120 watts peak.
High Frequency (HF) power: 40 watts RMS typical, ~120 watts peak.
Frequency response: 50hz 20kHz +/- 1.5dB.ÿ Bass level -3dB @ 39hz typical.
Signal To Noise ratio: > 90 dB A-weighted, Analog In to Analog Out,

- Power Requirements:
Input voltage: 100v 230v
Input frequency: 47 63 Hz
Power consumption: 20 W (idle)
130 W (typical, at maximum volume)

- Cables:
Mixer to Speaker: Balanced or unbalanced, shielded; XLR or 1/4" TRS connector.
Speaker to PC: Standard 9-pin, RS-232 serial cable (male-female).
Speaker to Speaker: Standard 9-pin, RS-232 serial cable (male-female).

- Características:
Tamño (HxWxD): 17" x 11" x 13.5" (440mm x 280mm x 345mm)
Peso: 14.6kg
120W 2-way powered monitor
Circuito DSP
8" Kevlar-Carbon cone
Ferrofluid-cooled tweeter
Shielded
Biamped (80W/40W)
LED clip indicator